#! /bin/sh
# Copyright (c) 1995-2001 SuSE GmbH Nuernberg, Germany.
# Copyright (c) 2002 SuSE Linux AG Nuernberg, Germany.
#
# Author: Petr Mladek <feedback@suse.de>
#
# /etc/init.d/tomcat5
#
#   and its symbolic link
#
# /usr/sbin/rctomcat55
#
# System startup script for the Tomcat servlet container
#
### BEGIN INIT INFO
# Provides: tomcat 
# Required-Start: $local_fs $remote_fs
# X-UnitedLinux-Should-Start: $named $syslog $time
# Required-Stop:  $local_fs $remote_fs
# X-UnitedLinux-Should-Stop: $named $syslog $time
# Default-Start:  3 5
# Default-Stop:   0 1 2 6
# Short-Description: Tomcat Servlet Container
# Description:    Start Tomcat to allow JAVA server pages
### END INIT INFO

tomcatIsRunning()
{
  # fix for bnc#496371
  # -u : user; -U effective user; -o format (%a=arguments); -w -w: unlimited width
  ps -u "$TOMCAT_BASE_USER" -U "$TOMCAT_BASE_USER" -o '%a' -w -w | \
   grep -v '^grep ' | \
   grep -q " -Dcatalina.base=$CATALINA_BASE.*-Dcatalina.home=$CATALINA_HOME.*org.apache.catalina.startup.Bootstrap"
}

# Check for missing binaries and configuration
# Note: Special treatment of stop for LSB conformance
TOMCAT_CONFIG=/etc/sysconfig/tomcat55
test -r "$TOMCAT_CONFIG" || { echo "$TOMCAT_CONFIG not existing";
	if [ "$1" = "stop" ]; then exit 0;
	else exit 6; fi; }

#save JAVA_HOME before it gets overwritten
OLD_JAVA_HOME=$JAVA_HOME
OLD_JAVA_OPTS=$JAVA_OPTS
  
# Read config	
. "$TOMCAT_CONFIG"

# test whether JAVA_HOME and JAVA_OPTS were overwritten ... if empty now, reset to old values
test -n "$JAVA_HOME" || JAVA_HOME=$OLD_JAVA_HOME
test -n "$JAVA_OPTS" || JAVA_OPTS=$OLD_JAVA_OPTS

#CATALINA_HOME="$CATALINA_HOME_4"
#CATALINA_BASE="$CATALINA_BASE_4"
# defaults CATALINA_BASE to CATALINA_HOME
test -n "$CATALINA_BASE" || CATALINA_BASE="$CATALINA_HOME"

test -x "$CATALINA_HOME/bin/startup.sh" || { echo "$CATALINA_HOME/bin/startup.sh not installed"; 
	if [ "$1" = "stop" ]; then exit 0;
	else exit 5; fi; }
test -x "$CATALINA_HOME/bin/shutdown.sh" || { echo "$CATALINA_HOME/bin/shutdown.sh not installed"; 
	if [ "$1" = "stop" ]; then exit 0;
	else exit 5; fi; }

# is the BASE valid?
test -d "$CATALINA_BASE/webapps" || test -L "$CATALINA_BASE/webapps" || { echo "$CATALINA_BASE/webapps not existing"; 
	if [ "$1" = "stop" ]; then exit 0;
	else exit 6; fi; }

# valid user and group?
test -n "$TOMCAT_BASE_USER" || TOMCAT_BASE_USER="tomcat"
test -n "$TOMCAT_BASE_GROUP" || TOMCAT_BASE_GROUP="tomcat"

# pid set?
test -n "$CATALINA_PID" || CATALINA_PID="/var/run/tomcat55.pid"

# the following variables affects the server
export CATALINA_HOME CATALINA_BASE CATALINA_OPTS CATALINA_TMPDIR JAVA_HOME JAVA_OPTS JPDA_TRANSPORT JPDA_ADDRESS JSSE_HOME CATALINA_PID TOMCAT_BASE_USER TOMCAT_BASE_GROUP


# Shell functions sourced from /etc/rc.status:
#      rc_check         check and set local and overall rc status
#      rc_status        check and set local and overall rc status
#      rc_status -v     ditto but be verbose in local rc status
#      rc_status -v -r  ditto and clear the local rc status
#      rc_failed        set local and overall rc status to failed
#      rc_failed <num>  set local and overall rc status to <num><num>
#      rc_reset         clear local rc status (overall remains)
#      rc_exit          exit appropriate to overall rc status
. /etc/rc.status

# First reset status of this service
rc_reset

# Return values acc. to LSB for all commands but status:
# 0 - success
# 1 - generic or unspecified error
# 2 - invalid or excess argument(s)
# 3 - unimplemented feature (e.g. "reload")
# 4 - insufficient privilege
# 5 - program is not installed
# 6 - program is not configured
# 7 - program is not running
# 
# Note that starting an already running service, stopping
# or restarting a not-running service as well as the restart
# with force-reload (in case signalling is not supported) are
# considered a success.

case "$1" in
    start)
	echo -n "Starting Tomcat ($CATALINA_BASE)"
	## Start daemon with startproc(8). If this fails
	## the echo return value is set appropriate.

	# NOTE: startproc return 0, even if service is 
	# already running to match LSB spec.
	if tomcatIsRunning ; then
	  rc_failed 0
        else
	  # try to fix permissions
	  chown --dereference $TOMCAT_BASE_USER:$TOMCAT_BASE_GROUP "$CATALINA_BASE"
	  for dir in "$CATALINA_BASE/conf" \
		     "$CATALINA_BASE/logs" \
		     "$CATALINA_BASE/temp" \
		     "$CATALINA_BASE/server" \
		     "$CATALINA_BASE/webapps" \
		     "$CATALINA_BASE/work" ; do
	    # the command true is used because of for example conf directory may be mounted read-only
	    test -d "$dir" && chown -R -L --dereference $TOMCAT_BASE_USER:$TOMCAT_BASE_GROUP "$dir" 2>/dev/null || true
	  done
      touch $CATALINA_PID
      chown $TOMCAT_BASE_USER:$TOMCAT_BASE_GROUP $CATALINA_PID
  	  su $TOMCAT_BASE_USER -s /bin/bash -c "$CATALINA_HOME/bin/startup.sh $TOMCAT_OPTS > $CATALINA_BASE/logs//start.log 2>&1"
      sleep 5
          if tomcatIsRunning ; then
            rc_failed 0
	  else
	    rc_failed 7
	  fi    
        fi
	rc_status -v
	;;
    stop)
	echo -n "Shutting down Tomcat ($CATALINA_BASE)"
	## Stop daemon with killproc(8) and if this fails
	## set echo the echo return value.
        if tomcatIsRunning ; then
	  # wait 60 sec for stop at maximum
          wait_sec=60
	  while [ "$wait_sec" != "0" ] ; do
      su $TOMCAT_BASE_USER -s /bin/bash -c "$CATALINA_HOME/bin/shutdown.sh > $CATALINA_BASE/logs/stop.log 2>&1"
	    sleep 1
            if ! tomcatIsRunning ; then
	      # theTomcat server is stoped, end the loop
	      wait_sec=0
	      break
	    fi
	    wait_sec=$((wait_sec -1))
	  done
    # if tomcat is _still_ running, try it with kill:
    if tomcatIsRunning 
    then
      kill `cat $CATALINA_PID`
      # wait 60 sec for stop at maximum
            wait_sec=60
      while [ "$wait_sec" != "0" ] ; do
        sleep 1
              if ! tomcatIsRunning ; then
          # theTomcat server is stoped, end the loop
          wait_sec=0
          break
        fi
        wait_sec=$((wait_sec -1))
      done
    fi
    # if tomcat is __still__ running, try it with kill -9
    if tomcatIsRunning 
    then
      kill -9 `cat $CATALINA_PID`
      # wait 60 sec for stop at maximum
            wait_sec=60
      while [ "$wait_sec" != "0" ] ; do
        sleep 1
              if ! tomcatIsRunning ; then
          # theTomcat server is stoped, end the loop
          wait_sec=0
          break
        fi
        wait_sec=$((wait_sec -1))
      done
    fi
	  # check the final status
          if tomcatIsRunning ; then
	    rc_failed 1
	  else
	    rc_failed 0
	  fi
	else
	  rc_failed 0
	fi  
	# Remember status and be verbose
	rc_status -v
	;;
    try-restart)
	## Stop the service and if this succeeds (i.e. the 
	## service was running before), start it again.
        ## Note: try-restart is not (yet) part of LSB (as of 0.7.5)
        $0 status >/dev/null &&  $0 restart
	
	# Remember status and be quiet
	rc_status
	;;
    restart)
	## Stop the service and regardless of whether it was
	## running or not, start it again.
	$0 stop
	$0 start

	# Remember status and be quiet
	rc_status
	;;
    force-reload)
	## Signal the daemon to reload its config. Most daemons
	## do this on signal 1 (SIGHUP).
	## If it does not support it, restart.

	echo -n "Reload service Tomcat $($CATALINA_BASE)"
	## if it supports it:
	#killproc -HUP $TOMCAT_BIN
	#touch /var/run/FOO.pid
	#rc_status -v

	## Otherwise:
	$0 stop  &&  $0 start
	rc_status
	;;
    reload)
	## Like force-reload, but if daemon does not support
	## signalling, do nothing (!)

	# If it supports signalling:
	#echo -n "Reload service FOO"
	#killproc -HUP $TOMCAT_BIN
	#touch /var/run/FOO.pid
	#rc_status -v
	
	## Otherwise if it does not support reload:
	rc_failed 3
	rc_status -v
	;;
    status)
	echo -n "Checking for Tomcat ($CATALINA_BASE)"
	## Check status with checkproc(8), if process is running
	## checkproc will return with exit status 0.

	# Status has a slightly different for the status command:
	# 0 - service running
	# 1 - service dead, but /var/run/  pid  file exists
	# 2 - service dead, but /var/lock/ lock file exists
	# 3 - service not running

	# NOTE: checkproc returns LSB compliant status values.
        if tomcatIsRunning ; then
          rc_failed 0
	else
	  rc_failed 3
	fi
	rc_status -v
	;;
    probe)
        ## Optional: Probe for the necessity of a reload,
        ## give out the argument which is required for a reload.
        ;;
    *)
	echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
	exit 1
	;;
esac
rc_exit
